Polymeric Drop Out Fuse

Our Drop Out Expulsion type fuse cut outs are use in distribution system for protection of H.T lines and transformer centers Tap lines from short circuit, over-load and breaking / Making load current

Features: 

– Light weight, small size, easy for transportation and installation

– High mechanical strength

– Super performance for anti-pollution

– Low maintenance cost

Standard:

Our DO Fuse are manufactured and tested as per IS 9385 and IEC 282-2 respectively.

Structure: 

The channel/solid core Drop out fus set has single pole construction and outdoor type. Each pole has polymeric insulators, current carrying parts made of a highly conductive copper alloys and the contact portion is silver plated for corrosion resistance. The fuse tube made of fiber glass and epoxy resin coated with ultravoilet inhibitor on the outer surface and having arc quenching bone fiber liner inside.

Product Specification

S No.Product RatingProduct typeCurrent Rating
111 kVSolid Core100/200 Amp
211 kVChannel Type100/200 Amp
322 kVSolid Core100/200 Amp
422 kVChannel Type100/200/ Amp
533 kVSolid Core100/200/ Amp
633 kVChannel Type100/200/ Amp

In-House Testing Facility:

We have full in house testing facility for Polymeric Drop Out Switch. We are doing all the below test on our Polymeric Drop Out Switch as per relevant test standards during and after manufacturing on daily basis. 

  • Power Frequency Voltage Dry Test
  • Measurement of resistance of main circuit
  • Test to prove satisfactory operation
  • Dimensional Check
  • Galvanization test
  • Temperature Rise test

Type Test:

Our Polymeric Drop Out Switch have been type tested by CPRI Bangalore as per IS 9921 (Part 4) : 1985 and IEC 62271 -102 respectively for the following tests.

  • High Voltage Dry and Wet Power Frequency Withstand Test
  • Lightning Impulse voltage withstand test
  • Short time and peak withstand current test set
  • Temperature rise test
  • contact resistance test
  • Mechanical Endurance test

Quick links

About Us

Adinath Industries has an experience of more than two decades to its credit with the team of well qualified Engineers and has been supplying Plastic and rubber molded insulators to Indian Railways since last 15 years. Our Firm is registered with Research Design and Standard Organization (RDSO), Lucknow for the same.     

We are approved Vendor of the Indian Railways, IOCL, BPCL, HPCL, Many of State Electricity Boards and various Ordnance factories & Small Arms Factory in India, Also registered with Research Design & Standard Organization (RDSO) Lucknow for manufacturing of Rubber, Plastics, Castings and Forgings Items. 

Read More….

Contact Us

Work Plant - 1
Plot No: E-45(G-2), RIICO Indl Area, Khushkhera, Bhiwadi, Dist Alwar, Rajasthan - 301707 (INDIA)
Gaurav Jain (Managing Partner)
M: +91-9810060890
E: gaurav.jain@adinathindus.com
E: gaurav.adinathindus@gmail.com
Work Plant - 2
Plot No: E-41A, RIICO Indl Area, Khushkhera, Bhiwadi, Dist Alwar, Rajasthan - 301707 (INDIA)
Gautam Jain (Managing Partner)
M: +91-9811154680
E: gautam.jain@adinathindus.com
E: jaingautam1611@gmail.com
Work Plant - 3
Plot No: 224, Sector -7,
SIDCUL Indl Area, Haridwar,
Uttarakhand, - 249403 (INDIA)
Gautam Jain (Managing Partner)
M: +91-9811154680
E: info@adinathindus.com
E: jaingautam1611@gmail.com
Corporate Office
31, Rajendra Park, Pusa Road,
New Delhi - 110060 (INDIA)
T:+91-11-25784393, 47041479
Gaurav Jain (Managing Partner)
M: +91-9810060890
E: sales@adinathindus.com
E: info@adinathindus.com

Copyright © 2021, All Rights Reserved. 

Site developed by Adnet