Manufacturing Facilities

we are well equipped with advance machineries for our products which ensures high quality engineering solutions. 

We have fully automated machines to continuously improve the quality and production volumes. 

Our company assures for the best quality at competitive rates and timely delivery in line with the quality policy of the company as laid down in iso 9001:2015.

We are not only using best raw materials, advance technology, design and machine but also our production team is highly qualified and experienced in their own field.

We also arrange monthly training program for our production team to educate about the machine, process, raw materials, final product and new development in order to reduce defects and minimize rejections to achieve best possible quality.


  • Pultrusion is a continuous molding process whereby reinforcing fibers are saturated with a liquid polymer resin and then carefully formed and pulled through a heated die to form a part.
  • We have in house pultrusion process for making FRP rod dia 16 mm to 62 mm for Composite insulator. We are using world class glass roving and epoxy resin system to achieve the specials requirement for composite insulator.
Desma Rubber Injection Moulding Machine


  • Molding is the critical process for composite insulator.

  • We are using world best Desma rubber injection moulding machine for making housing on FRP rod. 

  • Our both 250 Ton and 400 Ton injection molding machine are highly sophisticated, computerize and have close loop system, which makes it inject rubber in a very control manner which are essential for composite insulator.


  • Crimping is the process to fixed metal fitting on FRP rod which transmitted the load from FRP rod to metal fitting.
  • We have fully automated PLC control crimping machines with Germany made crack detection devise to avoid any type of crimping failure. 
  • We have also adopted new technology to seal the interfaces between metal fitting and silicone rubber during crimping which will resist to ingress moisture in to the interfaces. 

Quick links

About Us

Adinath Industries has an experience of more than two decades to its credit with the team of well qualified Engineers and has been supplying Plastic and rubber molded insulators to Indian Railways since last 15 years. Our Firm is registered with Research Design and Standard Organization (RDSO), Lucknow for the same.     

We are approved Vendor of the Indian Railways, IOCL, BPCL, HPCL, Many of State Electricity Boards and various Ordnance factories & Small Arms Factory in India, Also registered with Research Design & Standard Organization (RDSO) Lucknow for manufacturing of Rubber, Plastics, Castings and Forgings Items. 

Read More….

Contact Us

Work Plant - 1
Plot No: E-45(G-2), RIICO Indl Area, Khushkhera, Bhiwadi, Dist Alwar, Rajasthan - 301707 (INDIA)
Gaurav Jain (Managing Partner)
M: +91-9810060890
Work Plant - 2
Plot No: E-41A, RIICO Indl Area, Khushkhera, Bhiwadi, Dist Alwar, Rajasthan - 301707 (INDIA)
Gautam Jain (Managing Partner)
M: +91-9811154680
Work Plant - 3
Plot No: 224, Sector -7,
SIDCUL Indl Area, Haridwar,
Uttarakhand, - 249403 (INDIA)
Gautam Jain (Managing Partner)
M: +91-9811154680
Corporate Office
31, Rajendra Park, Pusa Road,
New Delhi - 110060 (INDIA)
T:+91-11-25784393, 47041479
Gaurav Jain (Managing Partner)
M: +91-9810060890

Copyright © 2021, All Rights Reserved. 

Site developed by Adnet